5disposing of packaging, 6connecting the appliance, 7switching on the appliance – Liebherr CBNPgb 3956 Premium BioFresh NoFrost User Manual

Page 10: 1switching on the freezer compartment, 5control, 1brightness of the temperature display, 1adjusting the brightness, 2child proofing, 1setting the child lock function, 3door alarm

Advertising
background image

4.5 Disposing of packaging

WARNING

Danger of suffocation due to packing material and plastic film!

u

Do not allow children to play with packing material.

The packaging is made of recyclable materials:

-

corrugated board/cardboard

-

expanded polystyrene parts

-

polythene bags and sheets

-

polypropylene straps

-

nailed wooden frame with polyethylene panel*

u

Take the packaging material to an official collecting point.

4.6 Connecting the appliance

NOTICE

Risk of damage to the electronic control system!

u

Do not use stand-alone inverters (conversion of d.c. to a.c./

three-phase) or energy saving plugs.

WARNING

Fire and overheating hazard!

u

Do not use extension cables or multiple socket outlets.

The type of current (alternating current) and voltage at the

installation site have to conform with the data on the type plate

(see Appliance at a glance).
The socket must be properly earthed and fused. The tripping

current for the fuse must be between 10 A and 16 A.
The socket must be easily accessible so that the appliance can

be quickly disconnected from the supply in an emergency. It

must be outside the area of the rear of the appliance.

u

Check the electrical connection.

u

Plug in the power plug.

4.7 Switching on the appliance

Note

u

To switch on the entire appliance it is necessary only to

switch on the freezer compartment.

Switch on the appliance approx. 2 hours before

adding frozen food for the first time.
Do not load food to be frozen before the tempera-

ture display reads -18 °C.

4.7.1 Switching on the freezer compartment

u

Press On/Off button, freezer compartment

Fig. 3 (17)

.

w

The temperature display of the refrigerator compartment

indicates the current temperature inside.

w

The temperature display of the freezer compartment and the

alarm symbol flash until the temperature is sufficiently low. If

the temperature is above 0 °C, dashes flash. If it is below,

the current temperature flashes.

w

If “DEMO” is displayed, demo mode is activated. Please

contact the after sales service.

5 Control

5.1 Brightness of the temperature

display

You can adjust the brightness of the temperature display to the

light conditions of the room in which the appliance is installed.

5.1.1 Adjusting the brightness

The brightness is adjustable between

h0

(no illumination) and

h5

(maximum luminosity).

u

To activate the setting mode: press the SuperFrost button

Fig. 3 (18)

for about 5 s.

w The display indicates

c

.

w

The menu symbol

Fig. 3 (10)

shines.

u

Using the Up setting button, freezer compartment

Fig. 3 (15)

or Down setting button, freezer compartment

Fig. 3 (16)

,

select

h

.

u

To confirm: briefly press the SuperFrost button

Fig. 3 (18)

.

u

To make the display brighter: press Up button,

freezer compartment

Fig. 3 (15)

.

u

To make the display darker: press Down button,

freezer compartment

Fig. 3 (16)

.

u

To confirm: press SuperFrost button

Fig. 3 (18)

.

w

The brightness is adjusted to the new value.

u

To deactivate the set-up mode: press On/Off button, freezer

compartment

Fig. 3 (17)

.

-or-

u

Wait for 5 minutes.

w

The temperature is indicated again in the temperature

display.

5.2 Child proofing

The child-proofing function enables you to make

sure that the appliance is not inadvertently switched

off by playing children.

5.2.1 Setting the child lock function

u

To activate the setting mode: press SuperFrost button

Fig. 3 (18)

for about 5 s.

w

c

flashes on the display.

w

The menu symbol

Fig. 3 (10)

shines.

u

Briefly press the SuperFrost button

Fig. 3 (18)

.to confirm.

When

c1

is indicated in the display:

u

Tto activate the child lock, briefly press the

SuperFrost button

Fig. 3 (18)

.

w The child lock symbol

Fig. 3 (9)

shines.

c

flashes in the

display.
When

c0

is indicated in the display:

u

to deactivate the child lock, briefly press the SuperFrost

button

Fig. 3 (18)

.

w The child lock symbol

Fig. 3 (9)

goes out.

c

flashes in the

display.

u

To deactivate the set-up mode: press On/Off button, freezer

compartment

Fig. 3 (17)

.

-or-

u

Wait for 5 minutes.

w

The temperature is indicated again in the temperature

display.

5.3 Door alarm

For refrigerator / BioFresh compartment and freezer compart-

ment

Control

10

* Depending on model and options

Advertising