Beyerdynamic UHF Wireless System Opus 900 - Manual (Page 59)

english
59
1.9 NE 900 D Cobra – Operating instructions
The NE 900 D Cobra provides a CobraNet connector to connect to CobraNet-capable devices
of different manufacturers. In the following you will find some information on how to operate the
NE 900 D Cobra.
1.9.1 How to set the CobraNet send address
1. Download the “CobraNet Discovery
Utility” software from
www.cirrus.com/cobranetsoftware.
2. Start the program and follow the
installation notes.
3. Open the properties of the Internet
protocol (TCP/IP) under System control
-> Network connection
-> LAN connection.
4. Select “Use the following IP address”
and enter the IP address of your
computer with 192.168.1.xxx into the
“IP address” field. The last numbers
can be between 001 and 255. In this
example “100” was used. The subnet
mask is 255.255.255.0
17