Philips Grind & Brew Cafetière - Manual (Page 10)

3 Remove the coffee bean container lid (1) and fill the container with
coffee beans (2). Make sure there are enough coffee beans in the
container for the amount of coffee you want to brew.
Note: Always make sure the bean container is at least half full.
The maximum capacity of the coffee bean container is 250g. To prevent
the grinder from jamming, do not exceed this amount.
To prevent the grinder from jamming, do not use unroasted or
caramelised beans.
4 Turn the grind selection knob to select the desired type of grind;
from fine to coarse. There are nine grind settings.
5 To select the number of cups, press the 2-12 CUPS button as many
times as the desired number of cups.
, The 2-12 CUPS button lights up when you press it.
, The selected number of cups appears on the display.
, The grinder grinds the required amount of coffee beans.
Note: Make sure that the number of cups you select with the 2-12 CUPS
button is consistent with the amount of water in the water reservoir. Please
keep in mind that the appliance uses all water in the water reservoir.
6 Press the STRENGTH button once or several times until the desired
coffee strength is selected (mild, medium or strong).
, The STRENGTH button lights up when you press it.
, The display shows the selected coffee strength.
7 Press the START/STOP button to start the brewing process.
Keep away from the steam vent during brewing, as hot steam escapes
through the vent.
, The freshness indicator flashes on the display until the brewing
process is finished.
, The coffeemaker produces 5 beeps when the brewing process is
finished.
, The hotplate switches on automatically.
Do not touch the hotplate while it is on, as it gets hot.
8 Wait until the coffeemaker has stopped beeping before you remove
the jug from the hotplate.
EnglisH
10