Philips Grind & Brew Cafetière User Manual

Page 8

Advertising
background image

2

Open the water reservoir lid. Fill the water reservoir with fresh cold

water up to the 10-cup indication.

Note: Do not put coffee beans or ground coffee in the appliance.

3

Close the water reservoir lid.

4

Place the jug on the hotplate.

Note: Make sure the jug lid is in place. Without the jug lid, the drip stop

function (see chapter ‘dripstop’) is activated automatically.

Note: Make sure you put the jug on the hotplate with the spout facing into the

appliance.

5

Press the START/STOP button.

6

Press the pre-ground coffee button to switch off the grinder.

, The button lights up when you press it.

7

Press the START/STOP button to start the brewing process.

8

Let the appliance operate until all the water has flowed into the jug.

, The coffeemaker produces 5 beeps when the brewing process is

finished.

9

Press the START/STOP button to stop the brewing/ keep warm

process.

10

Empty the jug.

EnglisH

8

Advertising
This manual is related to the following products: