Billy Goat BC2402 Series - Manual (Page 10)

Part No 500264 10 F061207B
BC2402 Series Brush Cutter Owner’s Manual
OPERATION
DO NOT run engine in an enclosed area. Exhaust gases contain carbon monoxide, an
odorless and possibly fatal poison.
DO NOT start or operate engine if strong odor of gasoline is present.
DO NOT start or operate engine if gasoline is spilled. Move equipment away from spill
until gasoline has completely evaporated.
DO NOT operate engine without a muffler. Inspect muffler periodically and replace if
necessary. If equipped with muffler deflector, inspect deflector periodically and replace
if necessary.
DO NOT operate engine with grass, leaves or other combustible material near the
muffler.
DO NOT touch muffler, cylinder or cooling fins while engine is running. Contact with hot
surfaces may cause severe burns.
DO NOT operate equipment with bystanders in or near the work area.
DO NOT operate equipment with guards removed.
DO NOT operate equipment in areas containing rock, glass, string-like material, wire,
rags, cans, metal or other non-organic material.
DO NOT operate equipment on slopes greater than specified in Specifications section
of this manual.
DO NOT operate equipment near hot or burning debris or any toxic or explosive
materials.
DO NOT allow children to operate this equipment.
ALWAYS keep hands and feet away from moving or rotating parts.
ALWAYS check before use, transportation, or storage to make sure the battery is
secured and straps holding battery are in good condition. If the strap breaks it will allow
the battery to shift and could cause a short damaging the equipment. (Electric start)
ALWAYS connect battery terminals to proper connection cables. (Electric Start)
EAR PROTECTION is recommended when operating this equipment.
EYE PROTECTION is recommended when operating this equipment.