Vibration data, Intended use – Billy Goat BC2402 Series User Manual
Page 6
Part No 500264
6
F061207B
BC2402 Series Brush Cutter Owner’s Manual
SOUND DATA
SOUND LEVEL 93 Dba at Operator’s position
Sound tests were conducted in accordance with 2000/14/EEC and were performed on 2/21/2002 under the
conditions listed below.
Sound power level listed is the highest value for any model covered in this manual. Please refer to
serial plate on the unit for the sound power level for your model.
General Conditions:
Sunny
Temperature:
80
o
F (25
o
C)
Wind Speed:
2.0 mph (3.2 kph)
Wind Direction:
South
Humidity:
63.5%
Barometric Pressure:
29.98” Hg (761mm Hg)
VIBRATION DATA
VIBRATION LEVEL .5g (4.87 m/s
2
)
Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using
calibrated vibration test equipment. Tests were performed on 5/19/1995 under the conditions listed below.
General Conditions:
Sunny
Temperature: 89
o
F (31.7
o
C)
Wind Speed:
6.1 mph (9.9 kph)
Wind Direction:
West
Humidity: 49.7%
Barometric Pressure:
29.88” Hg (101.19 kPa)
INTENDED USE
Your BILLY GOAT ® BC Self-Propelled Brush Cutter is designed for cutting overgrown weeds, brush and other
growth down to 3½” (8.9 cm) in height. It is not a lawn mower and does not provide the quality cut of a finish
cut mower. It is designed for use in rural areas and should not be operated in tight or confined areas.