Securing a child restraint in a rear seat position, Securing a child restraint in a rear seat, Position -49 – Buick 2011 Lucerne User Manual

Page 81

Advertising
background image

Black plate (49,1)

Buick Lucerne Owner Manual - 2011

If the position you are
using has a fixed
headrest or head restraint
and you are using a dual
tether, route the tether
around the headrest or
head restraint.

3. Before placing a child in the child restraint, make

sure it is securely held in place. To check, grasp
the child restraint at the LATCH path and attempt
to move it side‐to‐side and back‐and‐forth. There
should be no more than 2.5 cm (1 in) of movement
for proper installation.

Securing a Child Restraint in a Rear
Seat Position

When securing a child restraint in a rear seating
position, study the instructions that came with the child
restraint to make sure it is compatible with this vehicle.

If the child restraint has the LATCH system, see Lower
Anchors and Tethers for Children (LATCH) on
page 2‑43
for how and where to install the child
restraint using LATCH. If a child restraint is secured in

the vehicle using a safety belt and it uses a top tether,
see Lower Anchors and Tethers for Children (LATCH)
on page 2‑43
for top tether anchor locations.

Do not secure a child seat in a position without a top
tether anchor if a national or local law requires that the
top tether be anchored, or if the instructions that come
with the child restraint say that the top strap must be
anchored.

In Canada, the law requires that forward-facing child
restraints have a top tether, and that the tether be
attached.

If the child restraint does not have the LATCH system,
you will be using the safety belt to secure the child
restraint in this position. Be sure to follow the
instructions that came with the child restraint. Secure
the child in the child restraint when and as the
instructions say.

If more than one child restraint needs to be installed in
the rear seat, be sure to read Where to Put the
Restraint on page 2‑41
.

1. Put the child restraint on the seat.

2. Pick up the latch plate, and run the lap and

shoulder portions of the vehicle's safety belt
through or around the restraint. The child restraint
instructions will show you how.

2-49

Advertising