Barco MDRC-2124 - Manual (Page 28)

28
Name Description
LED Allows to switch the power LED’s on state
on/off. The LED’s orange DPMS state is not
influenced by this setting. So, when the
display goes into power saving mode, the
LED will turn orange, even if it was switched
off by this setting.
OSD Settings Jumps to the OSD setting submenu (see
below).
Factory Reset Allows to reset the default factory settings
in all OSD menus. As a consequence all user
settings, including the user presets and user
profiles, will be erased and the display will
restart.
OSD setting submenu
Name Description
OSD Timeout Allows to adjust the OSD timeout as desired.
When selected, the OSD will automatically
disappear when the display controls are left
idle for the time selected.
Horizontal OSD
Position Allows to adjust the horizontal OSD position.
Vertical OSD
Position Allows to adjust the vertical OSD position.
OSD Direction Allows to switch the OSD orientation from
landscape to portrait and vice versa.