BlueAnt T1 - Manual (Page 5)

Taking Calls
When the phone rings, you can answer the
call with your voice: wait for the prompt to ask
you if you want to take the call, and then say
Answer or Ignore .
If you don’t want to wait for the prompt, or you
are in a noisy place:
> Click the MFB once to accept the call.
> Double click the MFB to reject the call.
During a call, click the MFB to end the call.
7 Voice Commands
To use any of the voice commands, click the MFB, wait for
the T1 to ask you to Say A Command , then say the command:
> Check Battery — Tells you the battery level on the T1.
> Call Information — Calls an information service number
stored in your headset. Call charges may apply.
> Phone Commands — Activates your phone’s voice dialing
feature (if available on your phone). Depending on your
phone model, you may need to record voice tags on the
phone to use this feature.
Voice recognition will cancel automatically after a short
period of time if you do not say a command. You can also
cancel voice recognition by clicking the MFB.
8