Best WPD28I - Manual (Page 4)

- 4 -
1. INSTALL DUCTWORK
This exhaust hood is designed for use with gas or electric outdoor cooking appliances when operated in an outdoor
covered patio or lanai area. As with all electrical appliances, this unit should be protected from the effects of weather
as much as possible.
The Best WPD28I model must be installed with the interior blower P12D only (sold separately). Other blowers cannot
be substituted.
Plan where and how the ductwork will be installed.
Install 10” round galvanized steel ductwork, elbows and roof or wall cap for the type of blower you are installing. Use
2” duct tape to seal duct joints.
The minimum hood distance above cooktop must not be less than 30”. A maximum of 36” above cooktop is
highly recommended for best capture of cooking impurities.
Run power cable to installation location.
ROOF CAP
30" TO 36" ABOVE
COOKING SURFACE
16 5 / 16 " to
TOP OF WOOD
MOUNTING STRIP
HOOD
OPTIONAL
DECORATIVE
FLUE or SOFFIT
10" ROUND DUCT
9" x 18" to 10"
ROUND TRANSITION
INCLUDED
18"
HH0022A
18"
WALL CAP
30" TO 36" ABOVE
COOKING SURFACE
16 5 / 16 " to
TOP OF WOOD
MOUNTING-STRIP
HOOD
OPTIONAL
DECORATIVE
FLUE or SOFFIT
9" x 18" to 10" ROUND
TRANSITION INCLUDED
HH0023A
WARNING
This unit is not designed for use with a charcoal grill.
!
WARNING
The power cable must be a GFCI protected branch circuit.
!