Warning, How to clean bare floors, Getting ready – Bissell PowerSteamer 1690 User Manual

Page 10

Advertising
background image

10

How to clean bare floors

Getting ready

NOTE: Your POWERSTEAMER

TM

is not recommended for

cleaning wood floors.

Use only BISSELL Floor Cleansing Formula

TM

on

no-wax floors. Never use BISSELL Fiber Cleansing
Formula

TM

or other carpet cleaners on bare floors.

Sweep before starting.

Remove old wax before cleaning.

Leave an exit path.

Allow at least 1/2 hour drying time.

1. Remove Clean Water Tank Assembly and Dirty Water

Tank Assembly.

2. Tip POWERSTEAMER

TM

back for easier access to Nozzle.

3. Attach Bare Floor Cleaning Tool to Nozzle with strip facing

forward, as shown. Align front edges and snap together.

4. Tip Handle Assembly back by pressing Release Pedal on left

side of Lower Chassis and pulling back on Handle Assembly.

5. Take Clean Water Tank to sink area, remove Clean Water

Tank Cap and fill Tank with hot (NOT boiling) tap water
to fill line. Replace Cap securely.

6. Remove SmartMix

TM

Formula Tank Assembly from Clean

Water Tank Assembly by grasping bottom with fingers and
sliding it out.

7. Unscrew SmartMix

TM

Formula Tank Cap and Insert

Assembly and add BISSELL Floor Cleansing Formula

TM

to

fill line. Reclose Cap tightly.

8. Slide SmartMix

TM

bottle back into position in Clean Water

Tank Assembly.

9. Replace Clean Water Tank Assembly. Slide Tank down front

of Handle Assembly until it fits snugly against top of Lower
Chassis. Secure with Clean Water Tank Latch Assembly.

10. Replace Dirty Water Tank Assembly.
11. Select SmartClean

TM

setting.

WATER ONLY - Use for gentle cleaning, or for (optional)
rinsing following cleaning.

NORMAL - Water and Floor Cleansing Formula

TM

are

mixed to optimize normal cleaning. Use for everyday
dirt and soil conditions.

HIGH TRAFFIC - Water and Floor Cleansing Formula

TM

are mixed to optimize heavy cleaning. Use for
entryways, hallways, heavy soil and stains. This
setting may require more frequent refilling on the
SmartMix

TM

bottle.

WARNING:

U s e

o n l y B I SS E L L F i b e r
Cleansing Formula

i n

your POWERSTEAMER.

Use of cleaning formulas
which contain lemon
or pine oil may damage
this appliance and void
w a r r a n t y. Chemical spot
cl eaners or sol ve nt-
based soil re mo vers
shou ld no t be used.
These products may
react with the plastic
materials used in your
P O W E R S T E A M E R,

c a u s i n g

cracking or pitting.

Snap Together

3.
Bottom Front Edge of
Lower Chassis

Bare Floor
Cleaning
Tool

Advertising
This manual is related to the following products: