Bissell PowerSteamer 1690 - Manual (Page 12)

Possible Causes Remedies
Clean Water Tank Assembly empty Refill Tank
SmartMix TM dispenser empty Fill with BISSELL Fiber Cleansing
Formula
TM
Spray Nozzle clogged Clean Spray Nozzle
Pump not operating properly Check electrical plug
Power switch on?
Turn POWERSTEAMER
TM off and hold
Trigger for 10-15 seconds. Turn Power
Switch to“CLEAN” position and hold
trigger for10-15 seconds
Call BISSELL Consumer Services
Possible Causes Remedies
Loose Triangle Cap Check cap and snap securely into Dirty
Water Tank Assembly
Dirty Water Tank Assembly Check Tank for proper alignment and
not aligned/secured secure with side latches
Flex Hose Assembly not secure Check fit of Hose at Vacuum Port
connections [Upholstery/Carpet Tool only]
Poor Tool position Adjust angle; apply more downward
[Upholstery/Carpet Tool only] pressure
Dirty Water Tank Assembly is full Empty Dirty Water Tank Assembly
Troubleshooting
Reduced spray or no spray
Vacuum not picking up cleaning solution
12
WARNING:
To reduce the risk of
fire, electric shock or
injury unplug from
outlet before servicing.