Braun 4041 - Manual (Page 6)

6
English
Caution
Read all instructions carefully
before using this product.
• This appliance was constructed
to process normal household
quantities. Please remember to
keep your Braun coffee grinder out
of the reach of children.
• Before operating, check whether
your voltage corresponds to the
voltage printed on the top of the
unit.
• Do not hold the motor part
1
under
running water or immerse it entirely
in water.
• Never remove the transparent lid
2
before the blades 5 have stopped
rotating.
• Braun electric appliances meet
applicable safety standards.
Repairs or the replacement of the
mains cord must only be done by
authorised service personnel.
Faulty, unqualified repair work may
cause considerable hazards to the
user.
Description
1
Motor part with grinding area
(maximum capacity 60 g of coffee
beans)
2 Transparent lid
3
On/off switch
4
Measuring calibration
5
Blades
6
Cord storage area
Grinding coffee
Take care not to overload the unit.
Do not fill coffee beans beyound the
brim of the unit (a). To start the coffee
grinder (b), replace the transparent lid
2
onto the motor part
1
, and de-
press the on/off switch
3
. To stop it,
simply release the on/off switch.
As a general guide, the chart below
provides suggested bean quantities
and recommends grinding time:
It is recommended not to continue
grinding for more than 30 seconds.
Longer operation does not result in a
finer grind but simply overheats the
coffee resulting in loss of aroma. You
will soon find your desired consistency
of grind.
After grinding your coffee take off the
transparent lid
2
from the motor part
1
and pour out the coffee grounds (c).
For additional accuracy use the
calibrations
4 on the side of the
transparent lid.
Note: For optimal flavour, it is
recommended to grind coffee beans
immediately before brewing.
Cups of
coffee
(125 ml) Amount
of beans
(table-
spoon) Approx.
grinding
time
(in seconds)
4 3 20
6 4 у 23
8 5 у 25
10 7 28
12 8 у 30
4041381_KSM2 Seite 6 Freitag, 5. Januar 2007 12:45 12