Bayou Classic 700-701 - Manual (Page 19)

O
N
-
C O
U NTE R-C
LO
C
K
W
IS
E
O
N
-
C O
U NTE R-C
LO
C
K
W
IS
E
O
N
-
C
O
U
N TE
R -CL O
CK
W
IS
E
17
Place lit Match in Gas Inlet
3
LIGHTING INSTRUCTIONS
WARNING
Keep head, hair and face away from exhaust vent when lighting. A flash flame can emit from the
exhaust vent during initial burner lighting, igniting hair and clothing.
Follow these instructions exactly. Read and follow all warnings and instructions in this manual before
using your fryer.
1. Make sure the regulator valve and cylinder valve are in the OFF positions.
2. Turn ON the fuel supply by S-L-O-W-L-Y rotating the cylinder valve counter-clockwise one full turn.
HINT: Turning the cylinder valve quickly causes a sudden rush of gas that sometimes activates the
Gas Flow Limiting Device. To prevent this, always rotate cylinder valve S-L-O-W-L-Y.
3. Place fire place match or long lighter in gas inlet, then S-L-O-W-L-Y turn regulator valve
counter-clockwise until you hear gas HISSING to the burner. Then light the burner, keeping
hair and face away from exhaust vent and burner.
4. Adjust the regulator valve for desired flame height.
5. After lighting, rotate cylinder valve to full open.
Make sure LP Cylinder is OFF
1
Make sure Regulator Valve is OFF
BEFORE LIGHTING
LIGHTING
ADJUST Regulator Valve
for Flame Intensity
4
NOTE: The brass valve on
regulator hose assembly
controls flame intensity
only. It is not an
ON/OFF valve.
S-L-O-W-L-Y Turn
LP Cylinder Valve One Full Turn
counter-clockwise
2
Gas will flow
to and stop
at closed
regulator
O
FF
- CLOCKW
IS
E
5
FOR YOUR SAFETY:
Light BURNER
HERE
O
N
-
C
O
U
N TE
R -CL O
CK
W
IS
E
S-L-O-W-L-Y
Turn Regulator Valve ON
counter-clockwise
O
FF
- CL O CK
W
IS
E
After lighting Fryer, OPEN
LP Cylinder Valve FULLY
counter-clockwise