Blaupunkt SR04 - Manual (Page 19)

18
Operation
3. Use the CATEGORY UP / DOWN button to move to the next or previous category, and then select a
channel from that category by highlighting the channel and pressing the OK button.
4. Press the DIRECT / PRESET button until the display shows “ENTER NUMBER.” At this point, use
the 0-9 buttons to enter a channel number. Once entered, the unit will automatically change to that
channel 2 seconds after the last digit has been entered.
• Once you have selected a channel, you can store the channel as a preset. 30 presets total can be
stored in the America SR04. 10 presets per preset bank B1, B2, and B3. To access Bank 2 and
Bank 3, repeatedly press the DIRECT/PRESET button until you see the desired bank in the top right
of your display.
• To store a preset channel, press and hold the 0-9 button where you would like to save the preset. If
you store a preset in the 1st preset location of bank 1, you will see in the top left of the display B1-1.
Enter Number
– – –