Philips SENSEO® Latte Select Kaffeepadmaschine - Manual (Page 17)

1 Pull the milk container lever upwards with your finger to release the
milk container unit. Then pull the milk container unit forwards to
remove it from the machine.
2 Press the milk container lid release lever (1), tilt the milk container
lid slightly (2) and pull the milk container lid upwards to remove it
from the milk container (3).
3 Pour out any milk that is left in the milk container and rinse the milk
container briefly under the tap.
4 Fill the milk container with cold water up to 2-cup cappuccino ff
indication.
Note: Do not fill the milk container with warm or hot water. If you do, the
machine only produces steam and does not clean the milk container unit
properly.
5 Fasten the milk container lid onto the milk container (‘click’).
6 Slide the milk container unit into the coffee machine (1) and push
down the milk container lever (‘click’) (2).
7 Place an empty cup under the coffee spout.
ENGLISH 17