Philips SENSEO® Latte Select Kaffeepadmaschine - Manual (Page 19)

5 Clean the milk container, the milk container lid and the milk tube in
the dishwasher or with a washing-up brush in hot water with some
washing-up liquid. Rinse the parts with fresh water after cleaning.
Note: Cleaning in the dishwasher is recommended, especially when the milk
container unit is very dirty. Before you put the milk container unit In the
dishwasher, all parts that can be opened should be opened and all detachable
parts should be detached.
6 After cleaning, push back the steam inlet (1), connect the milk tube
(2) and close the milk container lid cover (3).
Note: Push back the steam inlet before you close the lid, otherwise the steam
inlet does not fit anymore.
Note: Make sure that you push the milk tube far enough onto the connector so
that the holes in the connector are covered. If you do not push the milk tube
far enough onto the connector, you get less milk froth.
7 Fasten the milk container lid onto the milk container (‘click’).
Note: Make sure that all parts of the milk container lid are dry before you
reassemble the lid.
8 Slide the milk container unit into the coffee machine (1) and push
down the milk container lever (‘click’) (2).
ENGLISH 19