Philips SENSEO® Latte Select Kaffeepadmaschine User Manual
Page 24
2
Place the 1-cup pod holder q with a used coffee pod in the coffee
machine. Close the lid and make sure that it is locked properly.
Note: Always put a used coffee pod in the pod holder when you descale the
machine. This pod serves as a ‘filter’ to prevent the sieve in the pod holder from
getting clogged with scale residues.
3
Mix 50 grams of citric acid with 1 litre of water in a measuring jug.
Stir until the powder has completely dissolved.
4
Remove the water reservoir and fill it with the descaling mixture.
Then put the water reservoir back onto the coffee machine.
5
Put a bowl with a capacity of at least 1.5 litres under the spout to
collect the descaling mixture.
6
Press the on/off button 3 to switch on the machine.
, The machine is ready for descaling when the light ring around the
on/off button lights up continuously.
ENGLISH
24