KEMP VMware ESX - Manual (Page 14)

Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 14 / 22
VLM for VMware ESX, ESXi and vSphere
Installation Guide
Figure 3-11: Power On
2. Click the Power on the virtual machine link.
3. Select the Console tab and wait for the Virtual Machine to finish booting.
Figure 3-12: IP address
4. When the Virtual Machine finishes booting, a screen similar to the one above appears
which will show the IP address. Take note of this as you will need it to access the
LoadMaster Web User Interface (WUI).