Vlm for vmware esx, esxi and vsphere – KEMP VMware ESX User Manual
Page 18
Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 18 / 22
VLM for VMware ESX, ESXi and vSphere
Installation Guide
25. In the DNS configuration screen, enter the IP address(es) of the DNS Server(s) which
will be used to resolve names locally on the LoadMaster into the DNS NameServer input
field.
26. Click on the Add button.
27. Enter the domain name that is to be prepended to requests to the DNS nameserver into
the DNS NameServer input field.
28. Click on the Add button.
29. Click on the Route Management > Default Gateway menu option.
30. In the DNS configuration screen, enter the IP address of the default gateway into the
IPv4 Default Gateway Address input field.
31. If you have an IPv6 Default Gateway, please enter the value in the IPv6 Default Gateway
Address input field.
32. Click on the Set IPv4 Default Gateway button.
The LoadMaster is now fully installed and ready to be used. For further information on how to
configure and implement the Virtual LoadMaster, please refer to the LoadMaster
documentation which can be downloaded from the
page.