KEMP VMware ESX - Manual (Page 15)

Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 15 / 22
VLM for VMware ESX, ESXi and vSphere
Installation Guide
To change the IP address via the console view, follow the steps in Section 4.1.
Licensing and Configuration
You must now configure the LoadMaster to operate within your network configuration.
1. In your internet browser enter the IP address previously noted, ensure you place
’https://’ before the IP address.
2. You may get a warning regarding website security certificates. Please click on the
continue/ignore option.
3. The LoadMaster End User License Agreement screen appears.
Please read the license agreement and, if you are willing to accept the conditions
therein, click on the Agree button to proceed.
4. A screen will then appear asking if you are OK with the LoadMaster regularly contacting
KEMP to check for updates and other information. Click the relevant button to proceed.
Figure 3-13: License Required
5. If using the Online licensing method, fill out the fields and click License Now.
If you are starting with a trial license, there is no need to enter an Order ID.
If you are starting with a permanent license, enter the KEMP Order ID# if
this was provided to you.
If using the Offline Licensing method, select Offline Licensing, obtain the license text, paste it into
the License field and click Apply License.
For detailed instructions on how to register for a KEMP ID and license the
LoadMaster, refer to the Licensing, Feature Description.
6. After the LoadMaster has been licensed, a prompt will appear asking for a username and
password. Enter the user name and password and click OK.