Burris XT-120 - Manual (Page 19)

BATTERY
REPLACEMENT
1. With the XT-120 detached
from the firearm, hold the unit
in one hand and, with the
thumb of your other hand,
press down on the tab in the
top center of the backplate.
2. While keeping the tab depressed,
pivot the backplate away from the body
of the XT-120.
3. Remove the batteries by tipping the bezel upward to
allow the two 3-volt Lithium CR123A batteries to slide
out of their receptacle.
Retaining
Slot
Tab
17