Burris XT-120 User Manual
Page 5
8. Do not operate the XT-120 around any flammable or combustible material
such as cleaning solvents, paints or gasoline. Do not operate the XT-120
in an environment which may contain flammable gasses such as evapo-
rated gasoline.
9. Test the XT-120 periodically, especially after periods of non-use or prior
to employment to verify that it is operating properly.
10. The XT-120 requires completely charged batteries for proper operation.
Be careful when handling batteries to prevent leakage of harmful chemicals
which can damage skin, clothing or the XT-120 itself. To avoid injury, do
not expose batteries to excessive heat or allow any material leaked from a
battery to come in contact with eyes or skin. Follow instructions from the
battery manufacturer regarding the proper handling, storage and disposal
of batteries.
11. CAUTION: The bulb in the XT-120 generates intense heat. When
switched ON, never place the light on its face (bulb down) or you may
cause damage to the XT-120 or the surface on which it is placed.
3