Hyundai H-1409 - Manual (Page 3)

3
Important safeguards
· ATTENTION: The owner s manual contains important operating and maintenance instructions. For your safety, it is necessary to refer to the manual.
· DANGEROUS VOLTAGE: Uninsulated dangerous voltage that may be of sufficient magnitude to constitute a risk of electrical shock to persons is
present within this product enclosure.
· CAUTION: To reduce the risk of electric shock, do not remove cover (or back). Prefer servicing to qualified service personnel.
Power supply
Battery operation
· Open the battery compartment cover.
· Insert 6 batteries (UM-2/LR14). Please observe correct battery polarities or the set will not work.
· Close the battery compartment cover.
AC operation
· Before the first connecting of the appliance check that voltage indicated on the rating label corresponds the mains voltage in your home.
· The AC cord is located inside the battery compartment.
· Insert the plug into power supply.
CAUTION:
· When the set is only used with AC or is not used for 4 weeks or more, please remove the batteries, to avoid damage to the set from leakage of batteries.
· Always switch off the unit when not in use.
· Always unplug the appliance from power supply, when no use long time.
· Please note that the power of the set is "off" when the function switch is on "tape" position & no cassette button is pressed.
Stereo headphone connecting
· For private listening, insert 3.5 mm headphone into the stereo headphone jack (on the back side of the unit).
· Adjust volume control to the appropriate level as desired.
· When the stereo headphone jack is plugged, speaker will disconnect automatically.
Radio operation
· Set FUNCTION switch to RADIO position.
· Select your desired broadcasting band with BAND switch.
· Rotate the TUNING regulator to receive the desired broadcast as displayed in the LCD display.
· Adjust the telescopic antenna appropriately to obtain the best reception on the band selected.
· Adjust the level and quality of sound with VOLUME regulator.
· To turn off the radio, set the FUNCTION switch to TAPE (OFF) position, without any tape button pressed.