Dynamic bass boost system, Maintenance and care – Hyundai H-1409 User Manual

Page 7

Advertising
background image

7

· If your MP3-CD has no folders, you can use the "skip +10/folder" button to jump 10 songs ahead. This is useful if you have many songs on you want to

quickly jump to a particular song.

· Press "skip +10/folder" several times until you reach a song number near to your desired song, and then press "back" or "next" repeatedly to arrive and

the exact song you desire.

(note: the "skip +10" function only works on MP3-discs which have no folders).
· If your MP3-CD has folders, you can select the folder to playback by pressing the button.

· Each time you press the "skip +10/folder" button, the player jumps to the first song in the next folder.
(note: the "folder" function only works on MP3-discs which have folders. If your disc has no folders, pressing will perform the "skip +10" function).

Note: Good quality sound is guaranteed only when playing licensed MP3 discs.

Dynamic Bass Boost system

· The built in "super bass booster" circuit provides a powerful enhancement to low frequency music, giving a stronger bass sound which is ideal for "rock"

or "jazz" music.

· For increased bass at all volume levels, set the DBBS switch into On position for an emphasized bass sound.

Maintenance and care

· Check your batteries regularly, old or discharged batteries should be replaced. If the unit is not going to be used for some time

or is being run exclusively on the alternative power, remove the batteries to avoid leakage and damage.

· Electronic products of this kind should never be subjected to moisture or extreme temperatures.

· If necessary, clean the unit with a piece of cloth dampened with water only (be sure the AC power cord is disconnected from

the power supply).

· The heads and capstan are in constant contact with the moving tape. Use a small cotton bud with alcohol or special tape head cleaner to

clean these parts. Never touch the heads with anything metallic.

Erase protection

· To prevent accidental erasing of a cassette, simply break off the two plastic tabs located on the cassette tape s rear side.
· When a cassette with removed plastic tabs is inserted, the recording button cannot be pressed.

· If a cassette is to be erased and re-recorded at a later stage, simply cover the holes on the cassette where the tabs were removed,

with a piece of strong adhesive tape.

CD protection

Advertising