Philips HD8753-87 - Manual (Page 13)

11 ENGLISH 11
2 Press the “ ” button to start the cycle. The machine starts the auto-
matic priming of the circuit by dispensing some water through the
dispensing spout.
Y
ello
w
3 The bar under the icon shows the operation progress. When the pro-
cess is completed, the machine stops dispensing automatically.
4 Then the display shows the machine warm-up icon.
Y
ello
w
Automatic rinse/self- cleaning cycle
When warm-up is completed, the machine automatically performs a rinse/
self- cleaning cycle of the internal circuit with fresh water. This takes less
than a minute.
5 Place a container under the dispensing spout to catch the small
amount of water which will be dispensed.
6 The machine shows this display. Wait for the cycle to fi nish automati-
cally.
Note:
You can stop dispensing by pressing the “ ” button.
Y
ello
w
Gr
een
7 When the above steps are completed, the machine shows this display.