Philips HD8753-87 User Manual
Page 56
54
ENGLISH
25
Place back the “INTENZA+” water fi lter into the water tank if it was
installed.
Note:
At the end of the descaling cycle, wash the brew group as described in the
“Weekly cleaning of the brew group” chapter.
The two rinse cycles are performed in order to have the circuit cleaned
with a preset amount of water to ensure proper machine performance.
If the water tank is not fi lled up to MAX level, the machine might require
three or more cycles.
Note:
It may happen that some liquid leaks on the milk carafe dispenser during
descaling.
To reduce the leakage, proceed as follows:
1
Open the milk carafe dispenser by turning it counter-clockwise until it
locks into place.
2
Press fi rmly the swivel and turn it by 45° for two or three times as
shown in the pictures.