Braun 34443 - Manual (Page 31)

Page 29
To Engage Keeper Fitting:
1. Insert keeper fitting into
track (align two engage-
ment feet with holes in
track). See Photo A.
2. Push down on fitting
and slide fitting 1/2 slot
in either direction until it
clicks and locks in posi-
tion (see Photos B and
C). Pull firmly on belt to
ensure fitting is locked in
track.
To Release Keeper Fitting:
Lift plunger and slide fitting
1/2 slot in either direction
and lift fitting out of track.
Keeper Fitting and “L” Track
Attachment Instructions
WHEELCHAIR AND OCCUPANT RESTRAINT
A
C
B
D
Align engagement feet with holes. b. Slide keeper 1/2 slot in either direction.
a. Push down
on keeper.
Fully-engaged Keeper
a. Lift plunger.
b. Slide keeper and lift.
Keeper “L” Track