Braun 34443 - Manual (Page 40)

Page 38
SEAT REMOVAL AND INSTALLATION
When installing seats, be cer-
tain seat wiring harnesses are
reconnected. Failure to do so
may result in power seat functions
being disabled and/or the air bag
light illuminating.
Adjustable Pedals: The adjust-
able brake and accelerator pedal
feature is disabled when the driver
seat is removed.
Screw-on Connectors
Front seat wiring harnesses are
equipped with a screw-on connec-
tor (plug). Operate connectors as
detailed here and on page 39.
A label is posted on the seat wiring
harness plug which identifies the
top of the connector (“TOP” decal
28891). Position the plug with the
“TOP” label facing up when con-
CAUTION
Disconnect seat
wiring harness
before removing
seat. Failure to do
so may result in
property damage.
WARNING
Connect front seat
wiring harness plug
to socket provided
at top of seat base
before removing front
seat. Failure to do so
may result in serious
bodily injury and/or
property damage.
necting the plug to either recep-
tacle socket. Use this feature as
an alignment guide.
Note: Alignment grooves (slots)
are provided in receptacle sock-
ets. Receptacle sockets have a
single wider alignment groove that
is positioned at 12 o’clock (shown
on page 39). Seat wiring harness
plugs are equipped with mating
alignment guides (ears).