Philips HTS3541-F7 - Manual (Page 13)

11
English
EN
Caution
• Familiarize yourself with the network router
and networking principles. If necessary, read
documentation that accompanies the network
components. Philips is not responsible for lost,
damaged, or corrupt data.
Before you start
• For Netfl ix, VUDU and software update, make
sure that the network router has access to the
Internet with high-speed connection, and is not
restricted by fi rewalls or other security systems.
• Make the necessary connections described in
the quick start guide, and then switch the TV
to the correct source for your home theater.
Set up the wired network
What you need
• A network cable (RJ45 straight cable).
• A network router (with DHCP enabled).
1
Using a network cable, connect the LAN
connector on your home theater to the
network router.
2
Press ( Home ).
3
Select [Setup] , and then press OK .
4
Select [Network] > [Network Installation]
> [Wired (Ethernet)] .
5
Follow the onscreen instructions to complete
the setup.
• If connection fails, select [Retry] , and
then press OK .
6
Select [Finish] , and then press OK to exit.
• To view the network settings, select [Setup]
> [Network] > [View Network Settings] .
LAN
www
Set up the wireless network
Your home theater has built-in Wi-Fi for easy
access to the wireless network.
What you need
• A network router (with DHCP enabled). For
best wireless performance, coverage, and
compatibility, use 802.11n router.
1
Press ( Home ).
2
Select [Setup] , and then press OK .
3
Select [Network] > [Network Installation]
> [Wireless (Wi-Fi)] , and then press OK .
4
Follow the onscreen instructions to select
and set up the wireless network.
• If connection fails, select [Retry] , and
then press OK .
5
Select [Finish] , and then press OK to exit.
• To view the network settings, select
[Setup] > [Network] > [View Wireless
Settings] .
www