Philips HTS3541-F7 - Manual (Page 20)

18 EN
5 Change settings
The home theater settings are already confi gured
for optimal performance. Unless you have a reason
to change a setting, we recommend that you keep
the default setting.
Note
• You cannot change a setting that is grayed out.
• To return to the previous menu, press
BACK . To exit the menu, press ( Home ).
Language settings
1
Press ( Home ).
2
Select [Setup] , and then press OK .
3
Select [Preference] , and then press OK .
4
Press the Navigation buttons and OK to
select and change:
• [Menu language] : Select a display
language for menu.
• [Audio] : Select an audio language for discs.
• [Subtitle] : Select a subtitle language for discs.
• [Disc Menu] : Select a menu language for
discs.
Note
• If your preferred disc language is not available,
select [Others] from the list, and enter the
4-digit language code found at the end of this
user manual .
• If you select a language that is not available on a
disc, the home theater uses the default language
of the disc.
Picture and video settings
1
Press ( Home ).
2
Select [Setup] , and then press OK .
3
Select [Video] , and then press OK .
4
Press the Navigation buttons and OK to
select and change:
• [TV Display] : Select a picture format to
fi t the TV screen.
• [HDMI Video] : Select the resolution of
video signal that is output from HDMI OUT
(ARC) on your home theater. To enjoy the
selected resolution, make sure that your TV
supports the selected resolution.
• [HDMI Deep Color] : Recreate the natural
world on your TV screen by displaying
vivid images using billion colors. Your home
theater must be connected to a Deep
Color enabled TV through an HDMI cable.
• [Picture Settings] : Select pre defi ned
color settings for the video display.
• [Watch 3D video] : Set HDMI video to
support 3D or 2D video.
Note
• If you change a setting, make sure that the TV
supports the new setting.
Audio settings
1
Press ( Home ).
2
Select [Setup] , and then press OK .
3
Select [Audio] , and then press OK .
4
Press the Navigation buttons and OK to
select and change:
• [Night Mode] : For quiet listening,
decrease the volume of loud sounds on
your home theater. Night mode is only
available for Dolby-encoded DVD and
Blu-ray discs.
• [HDMI Audio] : Set the HDMI audio
output from your TV, or disable HDMI
audio output from the TV.
• [Default sound settings] : Restore the
equalizer settings of all the sound modes
to the default values.