Black Box FX802A - Manual (Page 20)

22
CAMPUS PAGER
5.3 Storing the Pager Code
Before you can use the Tone Pager or Vibrating/Tone Pager, you must
designate a pager code for each of the pagers.
NOTE
You must reset all pager codes when you enter a new system code.
To enter and save a pager code, follow these steps:
1. Turn the pager OFF.
2. Press and hold the ON/OFF switch, then slide it to the ON position (see
ON OFF
Figure 5-2. Pager ON/OFF Switch.