Philips RI9828-47 - Manual (Page 30)

28
7
13
8 9
10 11 12
14
When the solution is fi nished the
following message appears on
the display:
Remove the water tank, rinse
with fresh drinking water to
eliminate traces of the descaling
solution, then refi ll with fresh
drinking water.
Insert the tank back onto the
machine.
Rinse the machine’s circuits by
pressing the icon.
The machine performs the rinse cycle.
During the rinse cycle, the machine
may require the water tank to be fi lled.
The machine begins to dispense the
descaling solution through the hot
water / steam wand. The dispensing
occurs at predetermined intervals, in
order to allow the solution to settle.
The intervals are displayed as shown
above in order to check the progress
of the descaling cycle.
Once the rinse cycle is fi nished, the
above screen appears.
Remove the water tank, install the
water fi lter again (if desired) and fi ll
it with fresh drinking water.
Turn the knob until it is in the
rest position ( ).
When descaling is complete, return
to the main menu.
boiler descaling cycle boiler descaling cycle
fi ll water tank
fi ll the water tank with fresh
water
boiler cleaning cycle
fi ll water tank
8:30 am
15/06/06
NOTE: if the water fi lter is not used,
insert the small white fi lter
previously removed
(see step 1 - page 7) into the tank.
MAINTENANCE