Philips RI9828-47 - Manual (Page 7)

5
1 2 3
4
7
6 5
When the correct temperature is reached, the machine performs a priming of
the water circuit and a rinse cycle of the internal circuits. A small quantity of
water is dispensed. Wait for this cycle to be completed automatically.
(See page 22 to enable/disable the rinse function.)
INSTALLATION
Insert the plug into the socket
located on the back of the machine
and insert the other end into a
power outlet with suitable current.
Place a container beneath the hot
hot water / steam wand.
Remove the coffee bean hopper lid.
Fill the hopper with coffee beans.
Close the lid pushing it down
completely.
Press the main power button to the
“ON” position.
Make sure the power button is not pressed and the machine is turned off. Check the machine
features on the label on the bottom of the appliance.
Fill the tank with fresh drinking
water. Do not exceed the “max”
level indicated on the water tank.
Once fi lled, place the tank back into
the machine.
STARTING THE MACHINE
Remove the water tank.
Install the water fi lter as
recommended on page 7.