Bissell Powerforce HELIX 12B1 series - Manual (Page 12)

12
M
aintenance and Care
TurboBrush® Tool
Maintenance select models only
1. Turn power OFF. Unplug vacuum cord from
electrical outlet.
2. Remove tool from hose or from clip on
vacuum handle.
3. Twist collar so opening is at the top and lift
clear cover to remove.
4. Remove brush from belt and clean debris.
5. Replace brush inside belt and place ends
into slots on the sides.
6. Reposition top cover making sure to line
up inside tab at the front with the opening
on the cover. Twist collar until opening is at
the bottom to lock into place.
3
5