Bose T1 - Manual (Page 17)

9
S YSTEM S ETUP
Svenska Italiano Français Español Deutsch Dansk English Nederlands
Mounting the T1 on a microphone stand (optional)
The T1 ToneMatch TM audio engine microphone stand bracket allows you to mount the T1 on the shaft of most
microphone stands. For installation help, refer to the Quick Setup Guide that came with the bracket.
The bracket uses rotatable inserts which, when properly placed, provide a tight fit on the microphone stand shaft.
Figure 8 shows insert placements for some common shaft diameters. You may need to arrange these inserts differ-
ently for your particular music stand.
Figure 8
Bracket and
insert
placements
Removable insert
A
Removable insert
B
For 22 mm diameter For 20.5 mm diameter For 16 mm diameter For 14.5 mm diameter
A B A B A B A B