Bose T1 - Manual (Page 30)

O PERATING I NSTRUCTIONS
22
English Deutsch Español Français Italiano Nederlands Svenska Dansk
Using compressor/gate functions
The Comp/Gate function provides access to gate, compression, limiter, de-esser and
kick drum presets with adjustable parameters.
Note: To bypass the Comp/Gate settings, press the Type button. Press it again to
activate.
1. Rotate the Type button to access the list of Comp/Gate effects and highlight
your choice:
Compressor 1: Light ........ Compressor featuring a preset low-compression ratio with variable threshold and
gain parameters. Works well as a general-purpose compressor for most instruments
and microphones that require minimal level control.
Compressor 1: Medium ... Compressor featuring a preset moderate compression ratio with variable threshold
and gain parameters. Works well with basses, guitars, keyboards, and vocals
requiring subtle level control.
Compressor 1: Heavy ...... Compressor featuring a preset high compression ratio with variable threshold and
gain parameters. Works well with loud instruments – like horns and drums, as well
as strong vocals that require more aggressive level control.
Limiter .............................. Hard limiter featuring a preset ratio (
∞
:1) with variable threshold and gain parame-
ters. Works well with very loud instruments, such as drums, to prevent signal peaks
from overloading the channel.
De-Esser .......................... Side-chained compressor featuring a preset compression ratio with variable
threshold and gain parameters. Designed to reduce sibilance on vocals.
Noise Gate ....................... Noise gate with a fast preset attack time, variable threshold, and variable speed
(release time). Well-suited for eliminating unwanted noise from microphones and
instruments.
KickGate 1: Regular......... Gate featuring a preset attack time, and variable threshold and tightness (release
time) parameters. This is a Bose ® proprietary technology designed specifically for
kick drums. This robust gate provides maximum gain before feedback, making your
kick drum as loud as possible through an L1
TM system.
KickGate 2: Fast .............. Same as KickGate 1 – but adjusted for faster tempos. Select this setting if you are
using a double bass drum pedal.
CH 1 Comp/Gate
Type Thresh Speed
Gate –80.0dB 50%