Bose T1 - Manual (Page 18)

S YSTEM S ETUP
10
English Deutsch Español Français Italiano Nederlands Svenska Dansk
To install the microphone stand bracket:
1. Determine the diameter of the shaft on your microphone stand. The cutouts on the edge of the Microphone
Stand Bracket Quick Setup Guide can help you determine the diameter.
2. Remove the inserts (Figure 8 on page 9) from the bracket and re-insert them for the diameter you need.
3. Attach the microphone stand bracket to the microphone stand (Figure 9).
4. Attach the mounting bar to the microphone stand bracket.
5. Place the T1 on the mounting bar.
Figure 9
Mounting the
T1 on a
microphone
stand
Microphone
stand
Microphone stand bracket
Mounting bar
T1 ToneMatch TM
audio engine
The T1 can be mounted to the left or right.