Philips 10002518 - Manual (Page 12)

12
coffee or any other object may damage the ma-
chine.
• Replace the cover on the coffee bean hopper (1).
• (Fig.5A) - Insert the plug into the socket on the back
of the machine.
• (Fig.5B) - Insert the plug of the other end of the power
cord into a wall socket with suitable power voltage.
• Press the power button (17) to turn on the machine.
A red icon appears on the display.
This indicates that the circuit must be primed.
• (Fig.7) - To prime the water circuit, place a container
below the hot water/steam wand (Pannarello) (7).
• (Fig.8) - Turn hot water/steam knob (10) clockwise
and wait. A pre-set amount of water will be dispensed
from the Pannarello. An orange icon will immediately
be displayed:
Turn the hot water/steam knob (10) to close the
Pannarello.
• Now an orange icon will be displayed:
This indicates that the machine is heating up to tem-
perature.
Note: Before starting the machine after long
periods of inactivity or if the water tank has
been completely emptied, it is advisable to prime
the circuit.
When warm-up is complete, the machine
performs a rinse cycle of the internal circuits.
A small amount of water is dispensed. During this
phase an orange icon will be displayed:
Wait for this cycle to be completed automatically.
• When the rinse cycle is complete, a green icon will be
displayed:
The machine is now ready for use.
• To brew coffee, dispense hot water or steam, and
for a proper use of the machine, carefully follow the
instructions provided.
5 ADJUSTMENTS
The machine allows for certain adjustments that will per-
mit you to use it to its full potential.
5.1 Coffee Grinder Adjustment
Coffee is a natural product and its features
may change according to its origin and
blend. The Spidem coffee machine is equipped with
a self-adjusting system that allows using all types
of coffee beans available on the market (except
caramelized ones).
For this reason we recommend brewing several cups
of coffee before adjusting the coffee grinder.
Warning! The grinder adjustment knob, inside
the coffee bean hopper, must be turned only
when the grinder is running. Do not pour ground and/
or instant coffee into the coffee bean hopper.
Do not insert any material other than coffee
beans into the hopper. The grinder contains
moving parts that may be dangerous. Therefore, do
not insert fi ngers and/or other objects. Switch the
power button to off and remove the plug from the
socket before carrying out any type of operation
inside the bean hopper. Do not pour coffee beans
when the grinder is running.
The machine lets you make slight adjustments to the
coffee grinder to adapt it to the kind of coffee used.
This adjustment is carried out by adjusting the knob
found on the inside of the coffee bean hopper; this knob
must be pressed and turned only with the grinder ad-
justment key (20) provided with the coffee machine.
(Fig.28-29) - While the grinder is running, press and
turn the knob (with the supplied key) one notch at a
time and brew 2-3 cups of coffee; the grinder adjust-
INSTALLATION - ADJUSTMENTS