Bosch VIDEOJET X40 - Manual (Page 103)

VideoJet X40 Operation | en 103
Bosch Security Systems Installation and Operating Manual V3.5 | 2007.12
6.7 Backup
You can back up the video sequences or single images saved on the storage medium of the
VideoJet X40 to the computer's hard drive.
First select the required sequence as described in the previous section. The following buttons
are available for the backup:
1. Start playback of the sequence that you want to save either completely or partially on the
computer's hard drive.
2. Click the icon for the sequence backup. The backup starts immediately — this process is
displayed by a red dot in the icon.
3. Click the sequence backup icon again to end the backup.
This procedure can be repeated many times within the sequence to back up multiple extracts
from a longer sequence.
X
Click the button for backing up a single image to back up only snapshots from the running
sequence to your computer's hard drive.
The single images are immediately displayed in the Screenshots area after clicking. The
storage location for the sequences and single images can be specified in the configuration of
the VideoJet X40 (see Section 5.32.18 Path for JPEG and MPEG files, page 87).
6.7.1 Printing a Screenshot
You can view and print the saved screenshots individually.
1. Click a preview in the Screenshots area. A new window will open.
2. Click the Print button to start the printing process.
3. Click the close button X in the window title bar to close the window again.
Back up a sequence to the computer's hard drive
Back up a single image to the computer's hard drive