Bosch VIDEOJET X40 - Manual (Page 73)

VideoJet X40 Configuration Using a Web Browser | en 73
Bosch Security Systems Installation and Operating Manual V3.5 | 2007.12
5.26.3 Relay follows
If required, select a specific event that will trigger the relay. The following events are possible
triggers:
– Off
Relay is not triggered by events
– Connection
Trigger whenever a connection is made
– Video alarm
Trigger by interruption of the video signal at the corresponding input
– Motion alarm
Trigger by motion alarm at the corresponding input, as configured on the VCA page (see
Section 5.23 VCA, page 65)
– Local input
Trigger by the corresponding external alarm input
– Remote input
Trigger by remote station's corresponding switching contact (only if a connection exists)
5.26.4 Relay name
You can assign a name for the relay here. The name is shown on the button next to Trigger
relay. The Livepage can also be configured to display the name under the relay icon.
5.26.5 Trigger relay
Click the button to trigger the relay manually (for testing or to operate a door opener, for
example).
i
NOTICE!
The numbers in the lists of selectable events relate to the corresponding connections on the
unit, Video alarm 1, for example to the Video In 1 connection.