Bosch VIDEOJET X40 - Manual (Page 34)

34 en | Configuration Using a Web Browser VideoJet X40
V3.5 | 2007.12 Installation and Operating Manual Bosch Security Systems
5.6 Password
A VideoJet X40 is generally protected by a password to prevent unauthorized access to the
unit. You can use different authorization levels (User name) to limit access.
5.6.1 User name
The VideoJet X40 operates with three user names: service, user and live, which correspond
to different authorization levels.
The service user name is the highest authorization level. After entering the correct password,
this user name allows you to use all the functions of the VideoJet X40 and change all
configuration settings.
The user user name is the middle authorization level. You use it to operate the unit and also to
control cameras, for example, but you cannot change the configuration.
The live user name is the lowest authorization level. It can only be used to view the live video
image and switch between the different live image displays.
5.6.2 Password
You can define and change a separate password for each user name if you are logged in as
service or if the unit is not password protected.
Enter the password for the selected user name here.
5.6.3 Confirm password
Enter the new password a second time to eliminate typing mistakes.
i
NOTICE!
Proper password protection is only guaranteed when all higher authorization levels are also
protected with a password. If a live password is assigned, for example, a service and a user
password must also be set. When assigning passwords, you should therefore always start
from the highest authorization level, service, and use different passwords.
i
NOTICE!
The new password is only saved when you click the Set button. You should therefore click the
Set button immediately after entering and confirming a password, even if you also wish to
subsequently assign a password to another user name.