BMW K 1100 LT/RS - Manual (Page 170)

21.12
Removing and installing clutch
thrust bearing
• Remove rear wheel.
• Remove exhaust system.
• Detach clutch cable at clutch release lever (1).
• Loosen retaining clip (2) at sealing gaiter.
• Remove gaiter (3) with spring (4).
• Remove thrust bearing (5) with pointed-nose
pliers.
• Install in the reverse order of removal.
e
Caution:
ABS rear wheel:
Check and, if necessary, adjust the sensor clear-
ance after installing the brake caliper.
Sensor distance:
Maximum distance ..........................0.60...0.65 mm
............................................... (0.2362...0.25559in)
LT210100
1
5 4 3 2