Gradall 534B (9020-7317) Service Manual - Manual (Page 242)

(1) Remove the old element
gently to prevent knocking
dust off of it.
2) Always clean
the inside of the
housing carefully
3) Always clean the gasket
sealing surfaces of the
housing
4) Check for uneven dirt
patterns in your old filter
that indicate gasket leakage
5) Press your fresh gasket
to see that it springs back
6) Make sure the gasket seats
evenly
7) Ensure an
airtight fit on all
connections
and ducts
T
Air Filter Service Tips
7 Important Steps to Follow The Important “Don’t”
Don’t remove filter for inspection.
Never rap a filter to
clean it. Rapping only
damages the filter.
Never judge the
filter’s life by looking at it.
Measure how restricted its
airflow is.
Never leave an
air cleaner open
longer than necessary.
Don’t ignore a worn or
damaged gasket in the
housing....replace it!
Don’t use a damaged or
bunched filter.
Never use a
warped cover
on a housing.
Never substitute an
incorrect filter model
number.
Donaldson
I
Brochure No. F114004 (4/96) Replaces 1400-23
For more Information, Contact:
P.O. Box 1299
Minneapolis, MN 5544-1399 USA
Tel: 800-374-1374
FAX: (612) 887-3716
Interleuvenlaan, 1
B-3001 Leuven, Belgium
Tel. (32)-(16)-383811
Telefax: (32)-(16)-400077
Telex: 23205 Beldo B
Donaldson Company Inc. reserves the right to change or discontinue any model or specification at any time and without notice
Copyright 1996 Printed in the U.S.A. An Equal Opportunity Employer