Orbelle Seat N Go - Manual (Page 4)

Due to the way some carriages are built, the Hitchhiker may collapse under the carriage or its
wheels may collide with the carriage wheels when the carriage is moved backwards. To prevent
this from happening and for a comfortable and safe trip, an attachment bar (K) is included.
Locking Handle
To Pushchair To standing platform
(To Stroller) (To Step)
11. Connect the attachment bar (K) to the standing platform of the
Hitchhiker on one side (you should hear a click) and connect the
Elasick strap on the other side to any part in the middle of the
pushchair (carriage). If possible, it is recommended that you connect
the Elastic strap to the pushchair (carriage) in such a way that will
allow the bar (K) to be as parallel as possible to the floor.
12. After completing all adjustment the hitchhiker’s seat (C) should be
parallel to the ground, thus the wheels should be at a 90 degree angle.
13. Ensure that the grey piston (C) (the 3
rd extension of the bar) is
fully inserted into the second extension (B) (the grey piston will
extend automatically when you go up a kerb). Open the red lock
and move it all the way back towards the standing platform and
lock it into place
-4-