Steele Products SP-GG350 - Manual (Page 11)

3.5KW Generator
10
General Precautions (cont’d)
Mechanical
Always make sure the power switch is in its “OFF” position. Disconnect
the spark plug wire, and allow the engine to completely cool before
carrying out maintenance.
Check for damaged parts. Before using the generator, any part that
appears damaged should be carefully checked to determine that it will
operate properly and perform its intended function. Check for alignment
and binding of moving parts, any broken parts or mounting fixtures, and
any other condition that may affect proper operation technician.
The generator is designed with guards for protection from moving parts.
In any case, care must still be taken to protect personnel and equipment
from other mechanical hazards when working around the generator.
Do not operate the generator with safety guards removed. While the
Generator is running, do not attempt to reach around the safety guard
for maintenance or any other reason.
Keep hands, arms, long hair, loose clothing, and jewelry away from
moving parts. Be aware that when engine parts are moving fast they
cannot be seen clearly.
Keep access doors on enclosures closed and locked when access is not
required.
When working on or around the generator always wear protective
clothing including ANSI approved safety gloves, safety eye goggles, and
safety hat.
Do not alter or adjust any part of the generator that is assembled and
supplied by the manufacturer.
Always follow and complete scheduled engine and generator
maintenance.
Chemicals
Avoid contact with hot fuel, oil, exhaust fumes, and hot solid surfaces.
Avoid body contact with fuels, oils, and lubricants used in the generator.
If swallowed, seek medical treatment immediately. Do not induce
vomiting if fuel is swallowed. For skin contact, immediately wash with
soap and water. For eye contact, immediately flush eyes with clean
water and seek medical attention.