BNC 130 User Manual
Page 7
7
SECTION 1
SPECIFICATIONS
MODEL 106C/155/130 CHARACTERISTICS
Timing Characteristics
Rep Rate:
0 Hz-100 MHz
Width:
3 ns - 640 s (Pulse Mode); 3 ns (min.) at reduced
amplitude.
Impulses, fixed 400 ps fwhm (typical).
Input Characteristics
EXTERNAL DRIVE
Range:
dc - 300 MHz (200 MHz for zero Baseline level):
specifications apply dc - 100 MHz.
Input Impedance:
50 ohms.
Minimum Signal Amplitude:
300 mV.
Maximum Signal Amplitude:
±7 V dc or 10 V ac p-p.
Minimum Width:
5 ns; 3 ns (min.) at reduced amplitude.
Threshold Range:
±2.5 V.
Threshold Resolution:
10 mV.
Insertion Delay:
5 ns, typical (between EXT DR and LIGHT OUT).
Jitter:
30 ps rms (between EXT DR and LIGHT OUT).
Connector:
Threaded SMA (3 mm).
EXTERNAL MODE
Range:
100 Hz to 700 MHz (-3 dB).
Input Impedance:
50 ohms.
Sensitivity:
200 mV rms/mW, typical.
Maximum Signal Amplitude:
±2 V dc or 3 V ac p-p.
Total Harmonic Distortion:
< 20 dB below fundamental (0.5 mW avg, level with
0.5 mW rms modulation).
Insertion Delay:
5 ns, typical (between EXT MOD and LIGHT OUT).
Connector:
Threaded SMA (3 mm).