SkyTrak 10042 Operation Manual - Manual (Page 103)

Emergency Operations
101 Model 10042 Rev. 11/03
12. Slowly lower the boom and ground the carriage and/or attachment.
13. Shut off the engine.
14. Completely remove the load from the carriage and/or attachment if
you haven’t already done so.
15. Return to the cab, fasten your seat belt and start the engine.
16. Cycle the lift/lower and extend/retract cylinders several times to
bleed air from the system. Check for leaks.
17. Recheck the hydraulic oil level. Add oil if necessary.
3
OH2211
4
2
1
1
2
4 3