brake disk inspection, A. brake disk wear check, 1000 hour intervals) – SkyTrak 10042 Operation Manual User Manual

Page 146: A. front axle, Brake disk inspection, Warning, General maintenance

Advertising
background image

144

Model 10042

Rev. 11/03

General Maintenance

A. Brake Disk Wear Check

(1000 Hour Intervals)

Check the brake disks for wear
every 1,000 hours of operation or
yearly.

If the brake disks require service due to wear, the axle should be checked,
serviced and repaired only by experienced service technicians who are
aware of all safety instructions and particular component features.

A. Front Axle

1. Block all four wheels to help prevent the vehicle from moving after

the parking brake is disabled.

2. Remove the six hex nuts (1) securing the transmission covers (2) to

the frame. Remove the covers.

10. Brake Disk Inspection

WARNING:

BLOCK ALL FOUR WHEELS. Failure to do so

could result in death or serious injury from vehicle roll-away

P

1000

OH2690

MT2830

OH2372

2

1

Advertising