SkyTrak 6036 Operation Manual - Manual (Page 51)

Section 3 - Controls and Indicators
3-13 31200749
Outrigger Switches (10042 & 10054)
The rear switches (2) control the outriggers.
• The left switch controls the left outrigger and the right switch controls the right
outrigger.
• Push bottom of switches (3) to lower outriggers; push top of switches (4) to raise
outriggers.
• Use outriggers to increase stability and/or load capacity and in leveling the
telehandler. Study capacity charts to determine maximum load capacities, with
and without outriggers.
WARNING
TIP OVER HAZARD. Outriggers increase stability and load capacity only if they
are used properly. Using outriggers on soft surfaces could cause telehandler to
tip over. Always ensure surface can support telehandler and load.
OH3881
4 3
2